Characterization of LPG Hose Quality to Improve Consumer Safety Protection

Authors

  • Ary Budi Mulyono BRIN
  • Endi Hari Purwanto National Research and Innovation Agency of Indonesia

Keywords:

Indonesia National Standard, Liquefied petroleum gas hose, quality, safety protection

Abstract

Standards or technical specifications of a product can guarantee product quality and improve product safety. To guarantee the quality of rubber and thermoplastic hose for LPG stoves circulating in the community, the government has established SNI 7213:2014 Rubber Hoses for LPG Gas Stoves and SNI 8022:2014 Thermoplastic Elastomer Hoses for LPG Gas Stoves. This study aims to identify the characteristics of the LPG hose test results based on SNI 7213:2014 and SNI 8022:2014. The test parameters tested were tensile strength, elongation at break, and aging at 100oC for 72 hours. This study used a quantitative descriptive method and the hose sample was taken using purposive sampling. The results showed that there were still samples of LPG hoses whose test results were close to the maximum/minimum limits of the established SNI quality requirements. This indicates the need for corrective steps to be taken by LPG hose manufacturers so that the LPG hose quality can reach optimal value.

References

Arikunto. (2006). Prosedur Penelitian Suatu Pendekatan Praktek. PT. Rineka Cipta.

Aswal, D. K. (2020). Quality infrastructure of India and its importance for inclusive national growth. Mapan, 35(2), 139–150.

Basseri, A. (2005). Teori praktek barang jadi karet. Balai Penelitian Dan Teknologi Karet. Bogor.

BSN. (2009). Pengantar standardisasi (Vol. 198).

Daud, D. (2015). Kaolin sebagai bahan pengisi pada pembuatan kompon karet: pengaruh ukuran dan jumlah terhadap sifat mekanik-fisik. Jurnal Dinamika Penelitian Industri, 26(1).

Dewi, L., & Somantri, Y. (2018). Wireless Sensor Network on LPG Gas Leak Detection and Automatic Gas Regulator System Using Arduino. IOP Conference Series: Materials Science and Engineering, 384(1), 12064.

Harahap, L. R., & Buki, N. (2020). Pengaruh Campuran Abu Boiler Kelapa Sawit (Abks) dan Carbon Black terhadap Sifat Mekanik Kompon Karet. Jurnal Hasil Penelitian Bidang Fisika.

Hasan, A., Dewi, E., Purnamasari, I., Irawan, D., & AS, P. Y. (2019). SIFAT FISIK VULKANISAT KARET DENGAN BAHAN PENGISI VARIASI TANAH LIAT DI BERBAGAI LAPISAN AREA TAMBANG PT. BUKIT ASAM (PERSERO) TBK. KINETIKA, 10(1), 31–37.

Hazirah, N., Wan, B. C., Nafchi, A. M., & Huda, N. (2018). Tensile Strength, Elongation at Breaking Point and Surface Color of a Biodegradable Film Based on a Duck Feet Gelatin and Polyvinyl Alcohol Blend. Asia Pacific Journal of Sustainable Agriculture Food and Energy, 6(2).

Herminiwati, H., & Yuniari, A. (2010). Penggunaan precipitated calcium carbonate (PCC) sebagai filler untuk sol karet sepatu olah raga. Majalah Kulit, Karet, Dan Plastik, 26(1). https://doi.org/10.20543/mkkp.v26i1.240

Holden, G., Bishop, E. T., & Legge, N. R. (1969). Thermoplastic elastomers. Journal of Polymer Science Part C: Polymer Symposia, 26(1), 37–57.

Jannah, M., Fahlevi, M., Paulina, J., Nugroho, B. S., Purwanto, A., Subarkah, M. A., & Cahyono, Y. (2020). Effect of ISO 9001, ISO 45001 and ISO 14000 toward financial performance of Indonesian manufacturing. Systematic Reviews in Pharmacy, 11(10), 894–902.

Jayusman, I., & Shavab, O. A. K. (2020). Studi Deskriptif Kuantitatif Tentang Aktivitas Belajar Mahasiswa Dengan Menggunakan Media Pembelajaran Edmodo Dalam Pembelajaran Sejarah. Jurnal Artefak, 7(1).

Kristiani, M. (2015). Pengaruh Penambahan Kitosan dan Plasticizer Sorbitol Terhadap Sifat Fisiko-Kimia Bioplastik dari Pati Biji Durian (Durio Zibethinus). Universitas Sumatera Utara.

Kusriyanto, M., Yulianto, A., & Kurniawan, S. (2018). Early detection of LPG gas leakage based Wireless Sensor Networking. MATEC Web of Conferences, 154, 1045.

Leavline, E. J., Singh, D., Abinaya, B., & Deepika, H. (2017). LPG gas leakage detection and alert system. International Journal of Electronics Engineering Research, 9(7), 1095–1097.

Liu, M., Lu, J., Jiang, W., & Ming, P. (2023). Study on fatigue damage and fatigue crack propagation of rubber concrete. Journal of Building Engineering, 65, 105718.

Marlina, P., Pratama, F., Hamzah, B., & Pambayun, R. (2014). Pengaruh suhu dan lama penyimpanan terhadap karakteristik kompon karet dengan bahan pengisi arang aktif tempurung kelapa dan nano silika sekam padi. Jurnal Dinamika Penelitian Industri, 25(1), 43–51.

Mujiarto, I. (2005). Sifat dan karakteristik material plastik dan bahan aditif. Traksi, 3(2), 65.

Mulyono, A. B., & Pudjiastuti, U. (2013). Manfaat Ekonomi Penerapan Standar Di Sektor Makanan Menggunakan Metodologi ISO. Jurnal Standardisasi, 15(1).

Mulyono, A. B., & Purwanto, E. H. (2021). The expired period of Liquefied Petroleum Gas (LPG) rubber hose supports consumer safety aspects. IOP Conference Series: Materials Science and Engineering, 1072(1), 012016. https://doi.org/10.1088/1757-899X/1072/1/012016

Mulyono, A. B., & Purwanto, E. H. (2022). Characteristics of Quality Requirements for LPG Rubber Hose and LPG Thermoplastic Elastomer Hose in Indonesia. Proceeding International Conference on Religion, Science and Education, 1, 645–649.

Pemerintah. (2014). Undang-Undang Republik Indonesia nomor 20 tahun 2014 tentang standardisasi dan penilaian kesesuaian. Kemeterian Sekretariat Negara Republik Indonesia.

Pertiwi, Y. K., Martianto, T., & Priatni, A. (2021). Kajian Perbandingan Standar Karet Perapat Untuk Katup Tabung LPG. Pertemuan Dan Presentasi Ilmiah Standardisasi, 2020, 17–26.

Prasetya, H. A. (2016). Karakteristik Kompon Ban Dalam Kendaraan Bermotor Roda Dua Dengan Bahan Pengisi Karbon Ampas Tebu. Journal of Industrial Research (Jurnal Riset Industri), 10(3), 162–169.

Rahmaniar, R. (2012). Pemanfaatan Arang Cangkang Sawit dengan Proses Sol Gel untuk Pembuatan Kompon Karet. Jurnal Dinamika Penelitian Industri, 23(1), 77941.

Rai, N., & Thapa, B. (2019). A study on purposive sampling method in research. Kathmandu:Kathmandu School of Law.

Saefullah, A., Syahrial, H., & Santoso, A. (2012). Pendeteksi Kebocoran Tabung Gas Lpg Menggunakan Mikrokontroller At89S2051 Melalui Handphone Sebagai Media Informasi. 2012(Semantik), 18–25.

Scully, C. (2013). The effect of hydrocarbon exposure and temperature on the behaviour of elastomeric seals. University of Cape Town.

Setiorini, I. A. (2019). Karakteristik Termoplastik Elastomer Dari Karet Alam Dan Polipropilena Dengan Penambahan Carbon Black Filler. Jurnal Teknik Patra Akademika, 10(02), 41–44.

Sialagan, S. (2013). Pengendalian Mutu Dalam Manajemen Mutu ISO 9000. Majalah Ilmiah Bina Teknik, 1(1), 23–27.

Soundarya, T., & Anchitaalagammai, J. V. (2014). Control and Monitoring System for Liquefied Petroleum Gas (LPG) Detection and Prevention. International Journal of Innovative Research in Science, Engineering and Technology, 3(3), 696–700.

Tampubolon, B. D., Purwanto, E. H., & Mulyono, A. B. (2021). Metode Penentuan Umur Fungsional Selang Kompor Gas LPG. Jurnal Standardisasi, 23(3), 259–276.

Ulfiati, R. (2018). Implementasi Sistem Manajemen Mutu Secara Konsisten Menjamin Kualitas Produk. Jurnal Standardisasi, 18(3), 195–204.

Downloads

Published

2024-03-20

How to Cite

Mulyono, A. B., & Purwanto, E. H. (2024). Characterization of LPG Hose Quality to Improve Consumer Safety Protection. Proceeding International Conference on Religion, Science and Education, 3, 723–729. Retrieved from https://sunankalijaga.org/prosiding/index.php/icrse/article/view/1124

Issue

Vol. 3 (2024)

Section

Articles

License

Copyright (c) 2024 Ary Budi Mulyono, Endi Hari Purwanto

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.